The penetrant testing inspection line uses high sensitivity water washable and post emulsifiable oil for maximum process control such as safety-critical aerospace testing.
It enables the detection of surface discontinuities on parts made of ferromagnetic or non-ferromagnetic materials such as aluminum, titanium, carbon steel, stainless steels, ceramics, etc.
This facility is used for NDT training, NRCan certification exams, and to support research at CMQ.
Magnaflux MD3-1060L
Banc magnétique multidirectionnel -Triphasé 400A-600V.A.C, Puissance de 1200W, jusqu’à 6000A, possibilité de 150 mm d’acier
Le banc magnétique est utilisé pour détecter des discontinuités de surfaces ou sous la surface dans des matériaux ferromagnétiques (Fe, Ni, Co, Acier) en appliquant un champ magnétique ainsi qu’un médium magnétisable sur les régions offrant un champ magnétique de fuite.
Tube : Hamamatsu
Maximum power : 180kV
Focal size : 20 microns
Detector: Carestream DRX PLUS 3543
Spatial resolution : 139 microns
Image maximum spatial resolution: 10 microns
GEKKO 64:64PR with real-time TFM64.
Appareil : Magnaflux MD3-1060L
Multidirectional magnetic bench -Three-phase 400A-600V.A.C, Power 1200W possibility 150 mm steel
The magnetic bench is used to detect surface or subsurface discontinuities in ferromagnetic materials (Fe, Ni, Co, Steel) by applying a magnetic field and a magnetizable medium to the regions offering a leakage magnetic field.
This device is used as part of the training given at the CMQ as well as to support research.
2 YXLON 225kV tubes
and Y.TU 450-D08 900W -4500W
Rayzor Xpro Vidisco with Industrex HPX software
